The Best Binary Options Signal Providers (of 2019)

MAME 0.216

MAME 0.216

With the end of November in sight, it’s time to check out MAME 0.216! We’ve addressed the reported issues with last month’s bgfx update, and made a whole lot of little improvements to MAME’s internal user interface. In particular, setting up controls should be easier, and several issues affecting macOS users with non-English number format settings have been fixed. Some of the issues caused bad settings to be written to INI files. If you still don’t see the filter list panel on the system selection menu, try removing the ui.ini file.
This month, we’re able to present two unreleased 1970s prototypes from Italian developer Model Racing: their internal code names are Cane and Orbite. With the assistance of former Model Racing employees, the source code was extracted from the original disks. These games are incomplete, but they provide a unique look into early CPU-based arcade development. Game & Watch titles continue to be emulated, with the addition of Mario The Juggler, and the panorama screen Mickey Mouse and Donkey Kong Circus games in this release.
This release brings GameKing emulation to MAME. The system-on-a-chip used in this low-cost, low-resolution hand-held console from the early 2000s has been identified and emulated. Games for the colour-screen GameKing III are also playable. Acorn BBC Micro emulation has been re-worked to support internal expansion boards, and a number of additional peripherals are now available. ZX Spectrum emulation has been enhanced with better open bus read behaviour and support for two Miles Gordon Technology peripherals.
Of course, these are just the highlights. You can get the source and Windows binary packages from the download page.

MAMETesters Bugs Fixed

New working machines

New working clones

Machines promoted to working

New machines marked as NOT_WORKING

New clones marked as NOT_WORKING

New working software list additions

Software list items promoted to working

New NOT_WORKING software list additions

Source Changes

submitted by cuavas to emulation [link] [comments]

CRTPi-RGB v3.0 - Buster Busts Loose!

CRTPi Project Presents:

CRTPi-RGB v3.0

A CRTPi image for running 240p via GPIO RGB DAC Hats
Other Releases:
Changelog: v3.0 for 888 & 666 05/12/2020 - Emergency Fixes
Changelog: v3.0 for 888 & 666 05/08/2020
Changelog: v2.0 for 888 & 666 03/25/2020
Changelog: v1.1X for 666 12/20/2019
Changelog: v1.1X for 888 & 666 12/19/2019
Changelog: v1.0 for 888 & 666 11/7/2019
Changelog: v1.0 for 666 10/24/2019
Changelog: v1.0 for 888 & 666 10/22/2019
Changelog: v0.3 for 888 & 666 10/2/2019
Changelog: v0.2 for 888 09/27/2019
Changelog: v0.1 for 888 09/20/2019
Required Hardware:
What is a RetroTINK? Or a VGA666?
RetroTINK is a GPIO hat for the Raspberry Pi3/3B+ that converts digital video signal back into 24-bit analog. It provides output over RCA, S-Video, Component, and VGA -- as well as supporting CSYNC, super-resolutions, and custom resolution timings.
VGA666 is a GPIO hat for the Raspberry Pi that converts digital video signal back into an 18-bit analog out via VGA. It also allows for super-resolutions and custom resolution timings.
Pi2SCART is a GPIO hat for the Raspberry Pi that converts digital video signal back into an 18-bit analog RGB out via SCART. It also allows for super-resolutions and custom resolution timings.
What Does That Even Mean?
It makes your Pi capable of outputting a true 240p analog signal for CRT televisions and monitors, and is capable of 5x (1600x240) and higher super resolutions.
What Does That Look Like?
I don't have the greatest pics saved for comparison, but here's some examples of the 888.
What is Different? (888 & 666)
  • Retropie 4.6 (build 7c5e31bb commit 05/07/20 Buster 10)
  • Retroarch 1.8.5
  • 4GB (3872256 KB) Uncompressed Image (Compressed via WinRAR to 982256 KB)
  • SSH, Samba Share, and USB Rom Service enabled by default
  • Custom /boot/config.txt settings for DPI output and custom HDMI timings
  • Optional overclock values in /boot/config.txt for Pi2 & Pi3B (disabled by default)
  • Modified Michael Vencio's Runcommand “On Start” and “On End” scripts to automatically change the resolution system-by-system and game-by-game
  • Modified Runcommand "On Start" script to allow creation of game-specific arcade configs for arcade/fba/mame-libretro/neogeo
  • NTSC @ 60hz 320x240 resolution for Emulationstation and DOSBox/ScummVM/Kodi
  • NTSC @ 60hz 2048x240, 1920x240, and 1600x240 resolution for Retroarch
  • Per-system custom refresh rates for Retroarch
  • Single-frame Run Ahead enabled for many 8-bit & 16-bit consoles and handhelds for Retroarch
  • Preloaded with free 240p test suites for multiple consoles with art by chipsnblip
  • Preloaded with additional stable (opt) Retroarch emulators
  • Preloaded with DOSBox and ScummVM
  • Preloaded with various 4:3 splashscreens from the RPiF download
  • Custom 4:3 Arcade DOJ "Winners DO Use Drugs" splash screen.
  • Preloaded with MUNT Roland MT-32 MIDI emulation for DOSBox/ScummVM
  • Preloaded with custom runcommand launching screens for supported systems
  • Preconfigured MOST Retroarch emulators for proper Integer Scale SuperRes
  • Retroarch FCEUmm (NES) Emulator preconfigured for 8:7 vert overscan crop enabled w/ composite-direct-fbx palette
  • Retroarch Gambatte (GB/GBC) emulator preset to Super Game Boy (SGB2 auto coloration) mode with Integer Scale Overlay
  • Retroarch mGBA (GBA) emulator preset to Game Boy Player mode with Integer Scale Overlay
  • Emulationstation preloaded with Ruckage's RetroPie menu icons
  • Emulationstation preloaded with Ruckage's snes-mini (default) and nes-mini themes configured for 4:3
  • Custom ScummVM system artwork for snes-mini theme
  • Emulationstation systems ordered chronologically instead of alphabetically
  • Emulationstation preconfigured with best settings for analog A/V including best settings for video preview screensavers
  • Custom Retropie menu scripts for switching between Retrotink and VGA666-based hardware ___
What is Run-Ahead?
The Run Ahead feature calculates the frames as fast as possible in the background to "rollback" the action as close as possible to the input command requested.
I've enabled run-ahead on most of the 8 & 16-bit consoles and handhelds. A single frame (and using the second instance) is saved here, which dramatically improves input lag without affecting performance on a Pi3B. More frames would require more hardware power, and may be achievable via overclocking.
lr-snes9x2010 consistent 60.0-60.2 FPS @ 60.098801hz lr-fceumm consistent 60.0-60.2 FPS @ 60.098801hz lr-beetle-pce-fast consistent 60.1-60.2 @ 60.000000hz lr-genesis-gx-plus consistent 59.9-60.2 FPS @ 59.922741hz (both genesis and sega cd) lr-picodrive consistent 59.9-60.2 FPS @ 59.922741hz (master system, game gear, and 32X) lr-gambatte consistent 60.0-60.2 FPS @ 60.098801hz (SGB2 framerate) lr-mgba consistent 59.8-60.4 FPS @ 60.002220hz (Gamecube framerate) 
To disable runahead for a game (or emulator):
Quick Menu > Latency > Run-Ahead to Reduce Latency > OFF 
What about your new Per-Game Configs and Snap-Shader?
The RGB and VGA forks are now utilizing Snap-Shader, plus a newly-enhanced runcommand-onstart script, with provision for user-specified per-game configuration!
Here's the new script:
https://github.com/crtpi/CRTPi-Project/blob/masteRGB-to_opt/retropie/configs/all/runcommand-onstart.sh 
Here's information about Snap-Shader:
https://github.com/ektgit/snap-shader-240p 
And here's a quick rundown on how it works:
Not only does the new script carry forward the per-core scripting for 2048x / 1920x / and 1600x resolutions -- but adds per-game scripting by adding a text file to the system config and naming the rom(s) within the file. This allows you to force 2048x on a system that defaults to 1920x. This is especially useful for PSX, FDS, PCE/PCE-CD, and MAME for the few games that are 256 or 512 wide. Below are some example config files:
/opt/retropie/conifgs/psx/256.txt
Brave Prove Castlevania - Symphony of the Night Crash Bandicoot Final Fantasy Origins Final Fantasy Tactics 
/opt/retropie/conifgs/megadrive/256.txt
Bubble And Squeak Bubsy in - Claws Encounters of the Furred Kind Bugs Bunny in Double Trouble Caesars Palace Captain America and the Avengers 
/opt/retropie/conifgs/fds/320.txt
Akumajou Dracula Donkey Kong Otocky Super Mario Brothers 2 
You get the jist. It doesn't need an extension, not case sensitive, but should match the ROM name (including punctuation) exactly. This forces them to launch in 2048x240p instead of the default 1920x240p. This gives the end user full control on a game-per-game basis over the horizontal integer. You'll still need to write a retroarch game config to override the defaults there, but this at least gets you the right field. For games with odd/shifting vertical resolutions (like Chrono Cross, Battle Arena Toshinden, Castlevania SotN, etc.), a single pass of snap-shader is applied (snap-basic, nearest neighbor filtering, and "don't care" scale).
What Does This NOT Have?
This doesn't have any ROMs (other than freeware test suites), BIOS files, music, screenshots, metadata, or videos concerning copy-written games. Other than the configurations and overlays, it has nothing that can't be downloaded through the repository or freeware.
Where Can I Get It?
You can download a premade image from Google Drive:
NOTE: Please expand your file system via Raspi-Config after your first boot, and reboot!
CRTPi-RGB v3.0: For Pi3B/3B+ with Retrotink, Pi2SCART, RGB-Pi, or VGA666
MD5: d9d28f5ae8fe5cc829348be4b5a103fc 
Install Instructions:
For Retrotink Ultimate:
  • Download image and unRAR it.
  • Flash to your SD card with Win32DiskImager or Etcher.
  • Boot as normal, run Raspi-Config, and choose Expand Filesystem from Advanced Options.
  • Reboot from Raspi-Config, and enjoy your Pi!
For Pi2SCART/RGB-Pi/VGA666:
  • Download image and unRAR it.
  • Flash to your SD card with Win32DiskImager or Etcher.
  • BEFORE BOOTING Edit 'config.txt' on your SD card's BOOT partition, uncomment the section relevant to your device, and comment all other devices.
    ## Pi2SCART & VGA666 only!!
    #dtoverlay=vga666
    #hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #Pi2SCART/VGA666 [email protected]
    __
    ## RGB-Pi only!!
    #dtoverlay=pwm-2chan,pin=18,func=2,pin2=19,func2=2
    #dtoverlay=rgb-pi
    #dpi_output_format=6
    #hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #RGB-Pi [email protected]
    __
    ## RetroTINK Ultimate only!!
    #dtoverlay=dpi24
    #dpi_output_format=519
    #hdmi_timings=320 1 23 30 34 240 1 4 3 15 1 0 0 60 0 6400000 1 #RetroTINK [email protected]
__
  • Boot as normal, run Raspi-Config, and choose Expand Filesystem from Advanced Options, then reboot.
  • In Emulationstation, run "Enable VGA666" from the Retropie menu.
  • Your system will automatically reboot. Enjoy your Pi!
To Revert VGA666 to Retrotink Settings
  • In Emulationstation, run "Enable Retrotink" from the Retropie menu.
  • Your system will automatically reboot with the new settings.
Default Retroarch Keyboard Hotkeys
*SPACE: Enable Hotkey* F1 Menu F2 FF Toggle F3 Reset F4 Cheat Toggle F5 Save State F6 Load State F7 Change State - F8 Change State + F9 Screenshot F10 Mute ENTER: Exit 
I have X Issue! Help?
I only have like 500mb of free space on my XXgb SD card!
You need to expand your file system via Raspi-Config. Follow these steps.
Samba Share won't work after I set up Wi-Fi!
Samba share service starts on boot, pending that a network is available. Configure your Wi-Fi then reboot first, and if that doesn't fix it then go into Retropie Setup > Configuration/Tools > Samba > Install Samba. Once it's complete, reboot and it should be golden.
USB-Romservice and/or Retropie-Mount don't work!
Follow this guide, but follow these steps before plugging in your thumb drive:
  • Go to Retropie-Setup
  • Update retropie install script
  • Go to Manage Packages -> Optional Packages
  • Scroll all the way down to usbromservice
  • Uninstall usbromservice
  • Install it again from Binary
  • Once finished, choose Configuration, then Enable USB Romservice
  • Reboot, and wait for it to fully boot in to ES
  • Plug in USB stick (has to be FAT32) and WAIT A LONG TIME (if your stick has a light, wait for it to stop flashing)
Timings for Boot and Runcommand
320 x 240p @ 60hz Timings: Emulationstation, DOSBox, ScummVM, etc.
320 1 15 30 42 240 1 4 3 15 1 0 0 60 0 6400000 1 Retrotink 320x240p Timing 320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #VGA666 320x240p Timing 
Integer Scale Super-Resolution 240p @ 60hz Timings: All Retroarch Emulators
2048 1 160 202 320 240 1 3 5 14 0 0 0 60 0 42954545 1 #256x240/224p 1920 1 137 247 295 240 1 3 7 12 0 0 0 60 0 40860000 1 #320x240/224p 1600 1 73 157 204 240 1 4 3 15 0 0 0 60 0 32000000 1 #320x240/224p Alternate 
submitted by ErantyInt to u/ErantyInt [link] [comments]

CRTPi-RGB v2.0 - A Whole New World!

CRTPi Project Presents:

DEPRECIATED BUILD, SEE VERSION 3.0!

CRTPi-RGB v2.0

A CRTPi image for running 240p via GPIO RGB DAC Hats
Other Releases:
Changelog: v2.0 for 888 & 666 03/25/2020
Changelog: v1.1X for 666 12/20/2019
Changelog: v1.1X for 888 & 666 12/19/2019
Changelog: v1.0 for 888 & 666 11/7/2019
Changelog: v1.0 for 666 10/24/2019
Changelog: v1.0 for 888 & 666 10/22/2019
Changelog: v0.3 for 888 & 666 10/2/2019
Changelog: v0.2 for 888 09/27/2019
Changelog: v0.1 for 888 09/20/2019
Required Hardware:
What is a RetroTINK? Or a VGA666?
RetroTINK is a GPIO hat for the Raspberry Pi3/3B+ that converts digital video signal back into 24-bit analog. It provides output over RCA, S-Video, Component, and VGA -- as well as supporting CSYNC, super-resolutions, and custom resolution timings.
VGA666 is a GPIO hat for the Raspberry Pi that converts digital video signal back into an 18-bit analog out via VGA. It also allows for super-resolutions and custom resolution timings.
Pi2SCART is a GPIO hat for the Raspberry Pi that converts digital video signal back into an 18-bit analog RGB out via SCART. It also allows for super-resolutions and custom resolution timings.
What Does That Even Mean?
It makes your Pi capable of outputting a true 240p analog signal for CRT televisions and monitors, and is capable of 5x (1600x240) and higher super resolutions.
What Does That Look Like?
I don't have the greatest pics saved for comparison, but here's some examples of the 888.
What is Different? (888 & 666)
  • Retropie 4.5.17 (build 32617750 commit 03/21/20)
  • Retroarch 1.8.4
  • 8GB (7892992 KB) Uncompressed Image (Compressed via WinRAR to 4658943 KB)
  • SSH, Samba Share, and USB Rom Service enabled by default
  • Custom /boot/config.txt settings for DPI output and custom HDMI timings
  • Optional overclock values in /boot/config.txt for Pi2 & Pi3B (disabled by default)
  • Modified Michael Vencio's Runcommand “On Start” and “On End” scripts to automatically change the resolution system-by-system
  • Modified Runcommand "On Start" script to allow creation of game-specific arcade configs for arcade/fba/mame-libretro/neogeo
  • NTSC @ 60hz 320x240 resolution for Emulationstation and DOSBox/ScummVM/Kodi
  • NTSC @ 60hz 2048x240, 1920x240, and 1600x240 resolution for Retroarch
  • Per-system custom refresh rates for Retroarch
  • Single-frame Run Ahead enabled for many 8-bit & 16-bit consoles and handhelds for Retroarch
  • Preloaded with free 240p test suites for multiple consoles with art by chipsnblip
  • Preloaded with additional stable (opt) Retroarch emulators
  • Preloaded with DOSBox and ScummVM
  • Preloaded with Kodi 18.2 w/ Convergence Theme
  • Preloaded with various 4:3 splashscreens from the RPiF download
  • Custom 4:3 Arcade DOJ "Winners DO Use Drugs" splash screen.
  • Preloaded with MUNT Roland MT-32 MIDI emulation for DOSBox/ScummVM
  • Preloaded with Ruckage's runcommand launching screens for supported systems
  • Preconfigured MOST Retroarch emulators for proper Integer Scale SuperRes
  • Retroarch FCEUmm (NES) Emulator preconfigured for 8:7 vert overscan crop enabled w/ composite-direct-fbx palette
  • Retroarch Gambatte (GB/GBC) emulator preset to Super Game Boy (SGB2 auto coloration) mode with Integer Scale Overlay
  • Retroarch mGBA (GBA) emulator preset to Game Boy Player mode with Integer Scale Overlay
  • Emulationstation preloaded with Ruckage's RetroPie menu icons
  • Emulationstation preloaded with Ruckage's snes-mini (default) and nes-mini themes configured for 4:3
  • Emulationstation preloaded with PietDAmore's 240p Honey and Bubblegum themes
  • Emulationstation preloaded with KALEL1981's Super-Retroboy theme
  • Custom ScummVM system artwork for snes-mini theme
  • Emulationstation systems ordered chronologically instead of alphabetically
  • Emulationstation preconfigured with best settings for analog A/V including best settings for video preview screensavers
  • Custom Retropie menu scripts for switching between Retrotink and VGA666-based hardware ___
What is Run-Ahead?
The Run Ahead feature calculates the frames as fast as possible in the background to "rollback" the action as close as possible to the input command requested.
I've enabled run-ahead on most of the 8 & 16-bit consoles and handhelds. A single frame (and using the second instance) is saved here, which dramatically improves input lag without affecting performance on a Pi3B. More frames would require more hardware power, and may be achievable via overclocking.
lr-snes9x2010 consistent 60.0-60.2 FPS @ 60.098801hz lr-fceumm consistent 60.0-60.2 FPS @ 60.098801hz lr-beetle-pce-fast consistent 60.1-60.2 @ 60.000000hz lr-genesis-gx-plus consistent 59.9-60.2 FPS @ 59.922741hz (both genesis and sega cd) lr-picodrive consistent 59.9-60.2 FPS @ 59.922741hz (master system, game gear, and 32X) lr-gambatte consistent 60.0-60.2 FPS @ 60.098801hz (SGB2 framerate) lr-mgba consistent 59.8-60.4 FPS @ 60.002220hz (Gamecube framerate) 
To disable runahead for a game (or emulator):
Quick Menu > Latency > Run-Ahead to Reduce Latency > OFF 
What Does This NOT Have?
This doesn't have any ROMs (other than freeware test suites), BIOS files, music, screenshots, metadata, or videos concerning copy-written games. Other than the configurations and overlays, it has nothing that can't be downloaded through the repository or freeware.
Where Can I Get It?
You can download a premade image from Google Drive:
NOTE: Please expand your file system via Raspi-Config after your first boot, and reboot!

DEPRECIATED BUILD, PLEASE SEE VERSION 3.0!

CRTPi-RGB v2.0: For Pi3B/3B+ with Retrotink, Pi2SCART, RGB-Pi, or VGA666
MD5: f860516358f5c2941de3bc6170234b88 
Install Instructions:
For Retrotink Ultimate:
  • Download image and unRAR it.
  • Flash to your SD card with Win32DiskImager or Etcher.
  • Boot as normal, run Raspi-Config, and choose Expand Filesystem from Advanced Options.
  • Reboot from Raspi-Config, and enjoy your Pi!
For Pi2SCART/RGB-Pi/VGA666:
  • Download image and unRAR it.
  • Flash to your SD card with Win32DiskImager or Etcher.
  • BEFORE BOOTING Edit 'config.txt' on your SD card's BOOT partition, uncomment the section relevant to your device, and comment all other devices.
    ## Pi2SCART & VGA666 only!!
    #dtoverlay=vga666
    #hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #Pi2SCART/VGA666 [email protected]
    __
    ## RGB-Pi only!!
    #dtoverlay=pwm-2chan,pin=18,func=2,pin2=19,func2=2
    #dtoverlay=rgb-pi
    #dpi_output_format=6
    #hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #RGB-Pi [email protected]
    __
    ## RetroTINK Ultimate only!!
    #dtoverlay=dpi24
    #dpi_output_format=519
    #hdmi_timings=320 1 23 30 34 240 1 4 3 15 1 0 0 60 0 6400000 1 #RetroTINK [email protected]
__
  • Boot as normal, run Raspi-Config, and choose Expand Filesystem from Advanced Options, then reboot.
  • In Emulationstation, run "Enable VGA666" from the Retropie menu.
  • Your system will automatically reboot. Enjoy your Pi!
To Revert VGA666 to Retrotink Settings
  • In Emulationstation, run "Enable Retrotink" from the Retropie menu.
  • Your system will automatically reboot with the new settings.
Default Retroarch Keyboard Hotkeys
*SPACE: Enable Hotkey* F1 Menu F2 FF Toggle F3 Reset F4 Cheat Toggle F5 Save State F6 Load State F7 Change State - F8 Change State + F9 Screenshot F10 Mute ENTER: Exit 
I have X Issue! Help?
I only have like 500mb of free space on my XXgb SD card!
You need to expand your file system via Raspi-Config. Follow these steps.
Samba Share won't work after I set up Wi-Fi!
Samba share service starts on boot, pending that a network is available. Configure your Wi-Fi then reboot first, and if that doesn't fix it then go into Retropie Setup > Configuration/Tools > Samba > Install Samba. Once it's complete, reboot and it should be golden.
USB-Romservice and/or Retropie-Mount don't work!
Follow this guide, but follow these steps before plugging in your thumb drive:
  • Go to Retropie-Setup
  • Update retropie install script
  • Go to Manage Packages -> Optional Packages
  • Scroll all the way down to usbromservice
  • Uninstall usbromservice
  • Install it again from Binary
  • Once finished, choose Configuration, then Enable USB Romservice
  • Reboot, and wait for it to fully boot in to ES
  • Plug in USB stick (has to be FAT32) and WAIT A LONG TIME (if your stick has a light, wait for it to stop flashing)
Timings for Boot and Runcommand
320 x 240p @ 60hz Timings: Emulationstation, DOSBox, ScummVM, etc.
320 1 23 30 34 240 1 4 3 15 1 0 0 60 0 6400000 1 Retrotink 320x240p Timing 320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #VGA666 320x240p Timing 
Integer Scale Super-Resolution 240p @ 60hz Timings: All Retroarch Emulators
2048 1 180 202 300 240 1 3 5 14 0 0 0 60 0 42954545 1 #256x240/224p 1920 1 152 247 280 240 1 3 7 12 0 0 0 60 0 40860000 1 #320x240/224p 1600 1 85 157 192 240 1 4 3 15 0 0 0 60 0 32000000 1 #320x240/224p Alternate 
submitted by ErantyInt to u/ErantyInt [link] [comments]

CRTPi-RGB v2.0: A Whole New World!

CRTPi Project Presents:

CRTPi-RGB v2.0

A CRTPi image for 240p via RGB DAC Hats
Other Releases:
Changelog: v2.0 for 888 & 666 03/25/2020
Changelog: v1.1X for 666 12/20/2019
Changelog: v1.1X for 888 & 666 12/19/2019
Changelog: v1.0 for 888 & 666 11/7/2019
Changelog: v1.0 for 666 10/24/2019
Changelog: v1.0 for 888 & 666 10/22/2019
Changelog: v0.3 for 888 & 666 10/2/2019
Changelog: v0.2 for 888 09/27/2019
Changelog: v0.1 for 888 09/20/2019
Required Hardware:
What is a RetroTINK? Or a VGA666?
RetroTINK is a GPIO hat for the Raspberry Pi3/3B+ that converts digital video signal back into 24-bit analog. It provides output over RCA, S-Video, Component, and VGA -- as well as supporting CSYNC, super-resolutions, and custom resolution timings.
VGA666 is a GPIO hat for the Raspberry Pi that converts digital video signal back into an 18-bit analog out via VGA. It also allows for super-resolutions and custom resolution timings.
Pi2SCART is a GPIO hat for the Raspberry Pi that converts digital video signal back into an 18-bit analog RGB out via SCART. It also allows for super-resolutions and custom resolution timings.
What Does That Even Mean?
It makes your Pi capable of outputting a true 240p analog signal for CRT televisions and monitors, and is capable of 5x (1600x240) and higher super resolutions.
What Does That Look Like?
I don't have the greatest pics saved for comparison, but here's some examples of the 888.
What is Different? (888 & 666)
  • Retropie 4.5.17 (build 32617750 commit 03/21/20)
  • Retroarch 1.8.4
  • 8GB (7892992 KB) Uncompressed Image (Compressed via WinRAR to 4658943 KB)
  • SSH, Samba Share, and USB Rom Service enabled by default
  • Custom /boot/config.txt settings for DPI output and custom HDMI timings
  • Optional overclock values in /boot/config.txt for Pi2 & Pi3B (disabled by default)
  • Modified Michael Vencio's Runcommand “On Start” and “On End” scripts to automatically change the resolution system-by-system
  • Modified Runcommand "On Start" script to allow creation of game-specific arcade configs for arcade/fba/mame-libretro/neogeo
  • NTSC @ 60hz 320x240 resolution for Emulationstation and DOSBox/ScummVM/Kodi
  • NTSC @ 60hz 2048x240, 1920x240, and 1600x240 resolution for Retroarch
  • Per-system custom refresh rates for Retroarch
  • Single-frame Run Ahead enabled for many 8-bit & 16-bit consoles and handhelds for Retroarch
  • Preloaded with free 240p test suites for multiple consoles with art by chipsnblip
  • Preloaded with additional stable (opt) Retroarch emulators
  • Preloaded with DOSBox and ScummVM
  • Preloaded with Kodi 18.2 w/ Convergence Theme
  • Preloaded with various 4:3 splashscreens from the RPiF download
  • Custom 4:3 Arcade DOJ "Winners DO Use Drugs" splash screen.
  • Preloaded with MUNT Roland MT-32 MIDI emulation for DOSBox/ScummVM
  • Preloaded with Ruckage's runcommand launching screens for supported systems
  • Preconfigured MOST Retroarch emulators for proper Integer Scale SuperRes
  • Retroarch FCEUmm (NES) Emulator preconfigured for 8:7 vert overscan crop enabled w/ composite-direct-fbx palette
  • Retroarch Gambatte (GB/GBC) emulator preset to Super Game Boy (SGB2 auto coloration) mode with Integer Scale Overlay
  • Retroarch mGBA (GBA) emulator preset to Game Boy Player mode with Integer Scale Overlay
  • Emulationstation preloaded with Ruckage's RetroPie menu icons
  • Emulationstation preloaded with Ruckage's snes-mini (default) and nes-mini themes configured for 4:3
  • Emulationstation preloaded with PietDAmore's 240p Honey and Bubblegum themes
  • Emulationstation preloaded with KALEL1981's Super-Retroboy theme
  • Custom ScummVM system artwork for snes-mini theme
  • Emulationstation systems ordered chronologically instead of alphabetically
  • Emulationstation preconfigured with best settings for analog A/V including best settings for video preview screensavers
  • Custom Retropie menu scripts for switching between Retrotink and VGA666-based hardware ___
What is Run-Ahead?
The Run Ahead feature calculates the frames as fast as possible in the background to "rollback" the action as close as possible to the input command requested.
I've enabled run-ahead on most of the 8 & 16-bit consoles and handhelds. A single frame (and using the second instance) is saved here, which dramatically improves input lag without affecting performance on a Pi3B. More frames would require more hardware power, and may be achievable via overclocking.
lr-snes9x2010 consistent 60.0-60.2 FPS @ 60.098801hz lr-fceumm consistent 60.0-60.2 FPS @ 60.098801hz lr-beetle-pce-fast consistent 60.1-60.2 @ 60.000000hz lr-genesis-gx-plus consistent 59.9-60.2 FPS @ 59.922741hz (both genesis and sega cd) lr-picodrive consistent 59.9-60.2 FPS @ 59.922741hz (master system, game gear, and 32X) lr-gambatte consistent 60.0-60.2 FPS @ 60.098801hz (SGB2 framerate) lr-mgba consistent 59.8-60.4 FPS @ 60.002220hz (Gamecube framerate) 
To disable runahead for a game (or emulator):
Quick Menu > Latency > Run-Ahead to Reduce Latency > OFF 
What Does This NOT Have?
This doesn't have any ROMs (other than freeware test suites), BIOS files, music, screenshots, metadata, or videos concerning copy-written games. Other than the configurations and overlays, it has nothing that can't be downloaded through the repository or freeware.
Where Can I Get It?
You can download a premade image from Google Drive:
NOTE: Please expand your file system via Raspi-Config after your first boot, and reboot!
CRTPi-RGB v2.0: For Pi3B/3B+ with Retrotink, Pi2SCART, RGB-Pi, or VGA666
MD5: f860516358f5c2941de3bc6170234b88 
Install Instructions:
For Retrotink Ultimate:
  • Download image and unRAR it.
  • Flash to your SD card with Win32DiskImager or Etcher.
  • Boot as normal, run Raspi-Config, and choose Expand Filesystem from Advanced Options.
  • Reboot from Raspi-Config, and enjoy your Pi!
For Pi2SCART/RGB-Pi/VGA666:
  • Download image and unRAR it.
  • Flash to your SD card with Win32DiskImager or Etcher.
  • BEFORE BOOTING Edit 'config.txt' on your SD card's BOOT partition, uncomment the section relevant to your device, and comment all other devices.
    ## Pi2SCART & VGA666 only!!
    #dtoverlay=vga666
    #hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #Pi2SCART/VGA666 [email protected]
    __
    ## RGB-Pi only!!
    #dtoverlay=pwm-2chan,pin=18,func=2,pin2=19,func2=2
    #dtoverlay=rgb-pi
    #dpi_output_format=6
    #hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #RGB-Pi [email protected]
    __
    ## RetroTINK Ultimate only!!
    #dtoverlay=dpi24
    #dpi_output_format=519
    #hdmi_timings=320 1 23 30 34 240 1 4 3 15 1 0 0 60 0 6400000 1 #RetroTINK [email protected]
__
  • Boot as normal, run Raspi-Config, and choose Expand Filesystem from Advanced Options, then reboot.
  • In Emulationstation, run "Enable VGA666" from the Retropie menu.
  • Your system will automatically reboot. Enjoy your Pi!
To Revert VGA666 to Retrotink Settings
  • In Emulationstation, run "Enable Retrotink" from the Retropie menu.
  • Your system will automatically reboot with the new settings.
Default Retroarch Keyboard Hotkeys
*SPACE: Enable Hotkey* F1 Menu F2 FF Toggle F3 Reset F4 Cheat Toggle F5 Save State F6 Load State F7 Change State - F8 Change State + F9 Screenshot F10 Mute ENTER: Exit 
I have X Issue! Help?
I only have like 500mb of free space on my XXgb SD card!
You need to expand your file system via Raspi-Config. Follow these steps.
Samba Share won't work after I set up Wi-Fi!
Samba share service starts on boot, pending that a network is available. Configure your Wi-Fi then reboot first, and if that doesn't fix it then go into Retropie Setup > Configuration/Tools > Samba > Install Samba. Once it's complete, reboot and it should be golden.
USB-Romservice and/or Retropie-Mount don't work!
Follow this guide, but follow these steps before plugging in your thumb drive:
  • Go to Retropie-Setup
  • Update retropie install script
  • Go to Manage Packages -> Optional Packages
  • Scroll all the way down to usbromservice
  • Uninstall usbromservice
  • Install it again from Binary
  • Once finished, choose Configuration, then Enable USB Romservice
  • Reboot, and wait for it to fully boot in to ES
  • Plug in USB stick (has to be FAT32) and WAIT A LONG TIME (if your stick has a light, wait for it to stop flashing)
Timings for Boot and Runcommand
320 x 240p @ 60hz Timings: Emulationstation, DOSBox, ScummVM, etc.
320 1 23 30 34 240 1 4 3 15 1 0 0 60 0 6400000 1 Retrotink 320x240p Timing 320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #VGA666 320x240p Timing 
Integer Scale Super-Resolution 240p @ 60hz Timings: All Retroarch Emulators
2048 1 180 202 300 240 1 3 5 14 0 0 0 60 0 42954545 1 #256x240/224p 1920 1 152 247 280 240 1 3 7 12 0 0 0 60 0 40860000 1 #320x240/224p 1600 1 85 157 192 240 1 4 3 15 0 0 0 60 0 32000000 1 #320x240/224p Alternate 
submitted by ErantyInt to crtgaming [link] [comments]

MAME 0.216

MAME 0.216

With the end of November in sight, it’s time to check out MAME 0.216! We’ve addressed the reported issues with last month’s bgfx update, and made a whole lot of little improvements to MAME’s internal user interface. In particular, setting up controls should be easier, and several issues affecting macOS users with non-English number format settings have been fixed. Some of the issues caused bad settings to be written to INI files. If you still don’t see the filter list panel on the system selection menu, try removing the ui.ini file.
This month, we’re able to present two unreleased 1970s prototypes from Italian developer Model Racing: their internal code names are Cane and Orbite. With the assistance of former Model Racing employees, the source code was extracted from the original disks. These games are incomplete, but they provide a unique look into early CPU-based arcade development. Game & Watch titles continue to be emulated, with the addition of Mario The Juggler, and the panorama screen Mickey Mouse and Donkey Kong Circus games in this release.
This release brings GameKing emulation to MAME. The system-on-a-chip used in this low-cost, low-resolution hand-held console from the early 2000s has been identified and emulated. Games for the colour-screen GameKing III are also playable. Acorn BBC Micro emulation has been re-worked to support internal expansion boards, and a number of additional peripherals are now available. ZX Spectrum emulation has been enhanced with better open bus read behaviour and support for two Miles Gordon Technology peripherals.
Of course, these are just the highlights. You can get the source and Windows binary packages from the download page.

MAMETesters Bugs Fixed

New working machines

New working clones

Machines promoted to working

New machines marked as NOT_WORKING

New clones marked as NOT_WORKING

New working software list additions

Software list items promoted to working

New NOT_WORKING software list additions

Source Changes

submitted by cuavas to MAME [link] [comments]

CRTPi-RGB v3.0 - Buster Busts Loose!

CRTPi Project Presents:

CRTPi-RGB v3.0

A CRTPi image for running 240p via GPIO RGB DAC Hats
Other Releases:
Changelog: v3.0 for 888 & 666 05/08/2020
Changelog: v2.0 for 888 & 666 03/25/2020
Changelog: v1.1X for 666 12/20/2019
Changelog: v1.1X for 888 & 666 12/19/2019
Changelog: v1.0 for 888 & 666 11/7/2019
Changelog: v1.0 for 666 10/24/2019
Changelog: v1.0 for 888 & 666 10/22/2019
Changelog: v0.3 for 888 & 666 10/2/2019
Changelog: v0.2 for 888 09/27/2019
Changelog: v0.1 for 888 09/20/2019
Required Hardware:
What is a RetroTINK? Or a VGA666?
RetroTINK is a GPIO hat for the Raspberry Pi3/3B+ that converts digital video signal back into 24-bit analog. It provides output over RCA, S-Video, Component, and VGA -- as well as supporting CSYNC, super-resolutions, and custom resolution timings.
VGA666 is a GPIO hat for the Raspberry Pi that converts digital video signal back into an 18-bit analog out via VGA. It also allows for super-resolutions and custom resolution timings.
Pi2SCART is a GPIO hat for the Raspberry Pi that converts digital video signal back into an 18-bit analog RGB out via SCART. It also allows for super-resolutions and custom resolution timings.
What Does That Even Mean?
It makes your Pi capable of outputting a true 240p analog signal for CRT televisions and monitors, and is capable of 5x (1600x240) and higher super resolutions.
What Does That Look Like?
I don't have the greatest pics saved for comparison, but here's some examples of the 888.
What is Different? (888 & 666)
  • Retropie 4.6 (build 7c5e31bb commit 05/07/20 Buster 10)
  • Retroarch 1.8.5
  • 4GB (3872256 KB) Uncompressed Image (Compressed via WinRAR to 982256 KB)
  • SSH, Samba Share, and USB Rom Service enabled by default
  • Custom /boot/config.txt settings for DPI output and custom HDMI timings
  • Optional overclock values in /boot/config.txt for Pi2 & Pi3B (disabled by default)
  • Modified Michael Vencio's Runcommand “On Start” and “On End” scripts to automatically change the resolution system-by-system and game-by-game
  • Modified Runcommand "On Start" script to allow creation of game-specific arcade configs for arcade/fba/mame-libretro/neogeo
  • NTSC @ 60hz 320x240 resolution for Emulationstation and DOSBox/ScummVM/Kodi
  • NTSC @ 60hz 2048x240, 1920x240, and 1600x240 resolution for Retroarch
  • Per-system custom refresh rates for Retroarch
  • Single-frame Run Ahead enabled for many 8-bit & 16-bit consoles and handhelds for Retroarch
  • Preloaded with free 240p test suites for multiple consoles with art by chipsnblip
  • Preloaded with additional stable (opt) Retroarch emulators
  • Preloaded with DOSBox and ScummVM
  • Preloaded with various 4:3 splashscreens from the RPiF download
  • Custom 4:3 Arcade DOJ "Winners DO Use Drugs" splash screen.
  • Preloaded with MUNT Roland MT-32 MIDI emulation for DOSBox/ScummVM
  • Preloaded with custom runcommand launching screens for supported systems
  • Preconfigured MOST Retroarch emulators for proper Integer Scale SuperRes
  • Retroarch FCEUmm (NES) Emulator preconfigured for 8:7 vert overscan crop enabled w/ composite-direct-fbx palette
  • Retroarch Gambatte (GB/GBC) emulator preset to Super Game Boy (SGB2 auto coloration) mode with Integer Scale Overlay
  • Retroarch mGBA (GBA) emulator preset to Game Boy Player mode with Integer Scale Overlay
  • Emulationstation preloaded with Ruckage's RetroPie menu icons
  • Emulationstation preloaded with Ruckage's snes-mini (default) and nes-mini themes configured for 4:3
  • Custom ScummVM system artwork for snes-mini theme
  • Emulationstation systems ordered chronologically instead of alphabetically
  • Emulationstation preconfigured with best settings for analog A/V including best settings for video preview screensavers
  • Custom Retropie menu scripts for switching between Retrotink and VGA666-based hardware ___
What is Run-Ahead?
The Run Ahead feature calculates the frames as fast as possible in the background to "rollback" the action as close as possible to the input command requested.
I've enabled run-ahead on most of the 8 & 16-bit consoles and handhelds. A single frame (and using the second instance) is saved here, which dramatically improves input lag without affecting performance on a Pi3B. More frames would require more hardware power, and may be achievable via overclocking.
lr-snes9x2010 consistent 60.0-60.2 FPS @ 60.098801hz lr-fceumm consistent 60.0-60.2 FPS @ 60.098801hz lr-beetle-pce-fast consistent 60.1-60.2 @ 60.000000hz lr-genesis-gx-plus consistent 59.9-60.2 FPS @ 59.922741hz (both genesis and sega cd) lr-picodrive consistent 59.9-60.2 FPS @ 59.922741hz (master system, game gear, and 32X) lr-gambatte consistent 60.0-60.2 FPS @ 60.098801hz (SGB2 framerate) lr-mgba consistent 59.8-60.4 FPS @ 60.002220hz (Gamecube framerate) 
To disable runahead for a game (or emulator):
Quick Menu > Latency > Run-Ahead to Reduce Latency > OFF 
What about your new Per-Game Configs and Snap-Shader?
The RGB and VGA forks are now utilizing Snap-Shader, plus a newly-enhanced runcommand-onstart script, with provision for user-specified per-game configuration!
Here's the new script:
https://github.com/crtpi/CRTPi-Project/blob/masteRGB-to_opt/retropie/configs/all/runcommand-onstart.sh 
Here's information about Snap-Shader:
https://github.com/ektgit/snap-shader-240p 
And here's a quick rundown on how it works:
Not only does the new script carry forward the per-core scripting for 2048x / 1920x / and 1600x resolutions -- but adds per-game scripting by adding a text file to the system config and naming the rom(s) within the file. This allows you to force 2048x on a system that defaults to 1920x. This is especially useful for PSX, FDS, PCE/PCE-CD, and MAME for the few games that are 256 or 512 wide. Below are some example config files:
/opt/retropie/conifgs/psx/256.txt
Brave Prove Castlevania - Symphony of the Night Crash Bandicoot Final Fantasy Origins Final Fantasy Tactics 
/opt/retropie/conifgs/megadrive/256.txt
Bubble And Squeak Bubsy in - Claws Encounters of the Furred Kind Bugs Bunny in Double Trouble Caesars Palace Captain America and the Avengers 
You get the jist. It doesn't need an extension, not case sensitive, but should match the ROM name (including punctuation) exactly. This forces them to launch in 2048x240p instead of the default 1920x240p. This gives the end user full control on a game-per-game basis over the horizontal integer. You'll still need to write a retroarch game config to override the defaults there, but this at least gets you the right field. For games with odd/shifting vertical resolutions (like Chrono Cross, Battle Arena Toshinden, Castlevania SotN, etc.), a single pass of snap-shader is applied (snap-basic, nearest neighbor filtering, and "don't care" scale).
What Does This NOT Have?
This doesn't have any ROMs (other than freeware test suites), BIOS files, music, screenshots, metadata, or videos concerning copy-written games. Other than the configurations and overlays, it has nothing that can't be downloaded through the repository or freeware.
Where Can I Get It?
You can download a premade image from Google Drive:
NOTE: Please expand your file system via Raspi-Config after your first boot, and reboot!
CRTPi-RGB v3.0: For Pi3B/3B+ with Retrotink, Pi2SCART, RGB-Pi, or VGA666
MD5: aefbf8eb28d8dd9e1ba6f767725c38cb 
Install Instructions:
For Retrotink Ultimate:
  • Download image and unRAR it.
  • Flash to your SD card with Win32DiskImager or Etcher.
  • Boot as normal, run Raspi-Config, and choose Expand Filesystem from Advanced Options.
  • Reboot from Raspi-Config, and enjoy your Pi!
For Pi2SCART/RGB-Pi/VGA666:
  • Download image and unRAR it.
  • Flash to your SD card with Win32DiskImager or Etcher.
  • BEFORE BOOTING Edit 'config.txt' on your SD card's BOOT partition, uncomment the section relevant to your device, and comment all other devices.
    ## Pi2SCART & VGA666 only!!
    #dtoverlay=vga666
    #hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #Pi2SCART/VGA666 [email protected]
    __
    ## RGB-Pi only!!
    #dtoverlay=pwm-2chan,pin=18,func=2,pin2=19,func2=2
    #dtoverlay=rgb-pi
    #dpi_output_format=6
    #hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #RGB-Pi [email protected]
    __
    ## RetroTINK Ultimate only!!
    #dtoverlay=dpi24
    #dpi_output_format=519
    #hdmi_timings=320 1 23 30 34 240 1 4 3 15 1 0 0 60 0 6400000 1 #RetroTINK [email protected]
__
  • Boot as normal, run Raspi-Config, and choose Expand Filesystem from Advanced Options, then reboot.
  • In Emulationstation, run "Enable VGA666" from the Retropie menu.
  • Your system will automatically reboot. Enjoy your Pi!
To Revert VGA666 to Retrotink Settings
  • In Emulationstation, run "Enable Retrotink" from the Retropie menu.
  • Your system will automatically reboot with the new settings.
Default Retroarch Keyboard Hotkeys
*SPACE: Enable Hotkey* F1 Menu F2 FF Toggle F3 Reset F4 Cheat Toggle F5 Save State F6 Load State F7 Change State - F8 Change State + F9 Screenshot F10 Mute ENTER: Exit 
I have X Issue! Help?
I only have like 500mb of free space on my XXgb SD card!
You need to expand your file system via Raspi-Config. Follow these steps.
Samba Share won't work after I set up Wi-Fi!
Samba share service starts on boot, pending that a network is available. Configure your Wi-Fi then reboot first, and if that doesn't fix it then go into Retropie Setup > Configuration/Tools > Samba > Install Samba. Once it's complete, reboot and it should be golden.
USB-Romservice and/or Retropie-Mount don't work!
Follow this guide, but follow these steps before plugging in your thumb drive:
  • Go to Retropie-Setup
  • Update retropie install script
  • Go to Manage Packages -> Optional Packages
  • Scroll all the way down to usbromservice
  • Uninstall usbromservice
  • Install it again from Binary
  • Once finished, choose Configuration, then Enable USB Romservice
  • Reboot, and wait for it to fully boot in to ES
  • Plug in USB stick (has to be FAT32) and WAIT A LONG TIME (if your stick has a light, wait for it to stop flashing)
Timings for Boot and Runcommand
320 x 240p @ 60hz Timings: Emulationstation, DOSBox, ScummVM, etc.
320 1 15 30 42 240 1 4 3 15 1 0 0 60 0 6400000 1 Retrotink 320x240p Timing 320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #VGA666 320x240p Timing 
Integer Scale Super-Resolution 240p @ 60hz Timings: All Retroarch Emulators
2048 1 160 202 320 240 1 3 5 14 0 0 0 60 0 42954545 1 #256x240/224p 1920 1 137 247 295 240 1 3 7 12 0 0 0 60 0 40860000 1 #320x240/224p 1600 1 73 157 204 240 1 4 3 15 0 0 0 60 0 32000000 1 #320x240/224p Alternate 
submitted by ErantyInt to crtgaming [link] [comments]

The Greatest Guide To Best Binary Options Signals Providers 4 Best Binary Options Signals Providers & Reviews ... What Does The Best Binary Options Signals Providers for ... What Does The Best Binary Options Signals Providers for ... What Does The Best Binary Options Signals Providers for ... The Of The Best Binary Options Signals Providers for 2020 ... The 4 Best Binary Options Signals Providers & Reviews PDFs ...

BestBinaryOptionsSignal.com is a site featured in Binary Options Signals Providers reviews and recommendation. Our site is the Ultimate Source for Binary Options Trading Signals Information & Reviews. We list all the details about the Binary Options Signals Providers, which you can trust .Our Reviews Helps the traders to be informed about the best Signals ServiceRead More » Binary Options Signals Providers Updated List Option Robot App : #No.1 – Offers Free Demo Account ! The Option Robot basically gives traders the ability to set the system using the style which they want it to trade in. This software was not meant to trade in a haphazard way. That’s also part of the reason why we are saying that this Option Robot review system is not a scam. We’ve tested ... Best Binary Options Signals Providers 2018. Wading through the scams. With so many different Binary Options Signals providers and automated trading software, it’s very hard to know who to trust and who not to trust. Indeed there are quite a few scams out there that just want to take your money, promising heaps of profits but delivering nothing but disappointment and a depleted bank account ... The providers that we have listed on our site have the reputation as being the best binary options trading signal providers. You can feel secure in knowing that all of the trading signals provided by these traders come from the best of the best, including the most experienced traders and brokers on the market. Sunday, 8 January 2017. Best Binary Option Signals Providers The Best Binary Trading Signals Providers and Indicators. Binary options signals services inform traders immediately when a profitable trade is available. Many traders use these signals to aid in their binary options trading. To say simply, these signals help in making out the deals, which tend to give more financial profit. As an active trader in this field, you may have signals through ... The majority of signal providers are scams but you can check out Signal Push. I would never personally use a signal service, in this industry, if you want to make money you need to learn how to trade. Yes, even if you wish to take signals. But in ...

[index] [13536] [8415] [27340] [3816] [19309] [24923] [19885] [6114] [21821] [3634]

The Greatest Guide To Best Binary Options Signals Providers

Check This Link: https://bit.ly/2Qv1anO - The Greatest Guide To Best Binary Options Signals Providers Binary choices have two results: They settle either at ... Visit Now..: https://bit.ly/2DMbHIm - What Does The Best Binary Options Signals Providers for 2020 • Benzinga Mean? Binaryoptions-live-signal. com (Bls.com f... Our Website Link: https://bit.ly/3iv6X93 - The Of The Best Binary Options Signals Providers for 2020 • Benzinga There may be less possible for earnings in th... Look For More Info: https://bit.ly/30v8Tbs - What Does The Best Binary Options Signals Providers for 2020 • Benzinga Mean? Updated Jun, 2020 1489 Views Today... See Here: https://bit.ly/3iaB99h - What Does The Best Binary Options Signals Providers for 2020 • Benzinga Do? You sometimes will need to spend for software ... See Here: https://bit.ly/33QPIuu - The 4 Best Binary Options Signals Providers & Reviews PDFs Updated Aug, 2020 1349 Views Today Whether an amateur or skille... Click to The Following Post: https://bit.ly/2YFjnn5 - 4 Best Binary Options Signals Providers & Reviews Fundamentals Explained You in some cases will need to...

http://binary-optiontrade.matchko.cf